Universal columns are also known as I beams or H-sections due to their profile appearance. They are commonly used as vertical supports for most steel structures and are sometimes used as horizontal supports where height is limited. We hold a large stock of universal column...

We hold a large stock of PFC Channel and can cut to your requirements up to a maximum length of 12m. Due to the large amount of stock we hold we are able to offer a fast turnaround for collection and delivery within 2-4 working days, meaning you get the materials you need...

Back to back beams are two beams bolted together and used if greater support is need for above masonry work. Their spacing apart also means that they can support internal and external skins whilst leaving the cavity clear. We can supply back to back beams up to a length of 12m.

Back to back channels are two parallel flange channels which are bolted together. Their spacing apart means that a cavity can be left clear. We can supply back to back channels up to a length of 12m.

Flat Bar is a versatile product which is commonly used in fabrication. With a flat surface and square edge, this product can be purchased in a range of widths and thicknesses and up to a maximum length of 12m .

Rectangular hollow sections (RHS) are described by their depth, width and wall thickness 200 x 100x 10 where the 10mm represents the wall thickness of the RHS. The rectangular hollow section we stock is cold formed with the joint seam welded on the inside of the section.