Column with Plate

You can have a plate welded to your column to bridge either a 50 mm, 75 mm or 100 mm cavity. Select the paint yes/no option and then select the position of the plate you require. Once you save these two options please enter the length of column you require. The plate length will be the same as the column length and is calculated within the total...

You can have a plate welded to your column to bridge either a 50 mm, 75 mm or 100 mm cavity. Select the paint yes/no option and then select the position of the plate you require. Once you save these two options please enter the length of column you require. The plate length will be the same as the column length and is calculated within the total cost inclusive of welding. Don't forget you can also add timber and service holes to your column, please select these below and add them to your order. 

More

Column with Plate  There are no products in this category.

Subcategories

  • For 50mm Cavity

    We can weld a plate onto your column to bridge a 50mm cavity. Please select the position of the plate and then enter the length of column you require. The plate length will be the same as the column length and is calculated within the total cost inclusive of welding. Don't forget you can also add timber and service holes to your column, please select these below and add them to your order. 

  • For 75mm Cavity

    We can weld a plate onto your column to bridge a 75mm cavity.Please select the position of the plate and then enter the length of column you require. The plate length will be the same as the column length and is calculated within the total cost inclusive of welding. Don't forget you can also add timber and service holes to your column, please select these below and add them to your order. 

    Please Note 

    All plates are set back from the edge to allow for a muck joint. For example for 75mm cavity you would have: 100mm brick + 75 mm cavity + 100mm block = 275 mm therefore your steel will come with a 250 plate leaving enough room either side for a muck joint. 

  • For 100mm Cavity

    We can weld a plate onto your column to bridge a 100mm cavity. Please select the position of the plate and then enter the length of beam you require. The plate length will be the same as the beam length and is calculated within the total cost inclusive of welding. Don't forget you can also add timber and service holes to your beam, please select these below and add them to your order.

     Please Note 

    All plates are set back from the edge to allow for a muck joint .  For example for 100mm cavity you would have: 100mm brick + 100 mm cavity + 100mm block =300 mm therefore your steel will come with a 275 plate leaving enough room either side for a muck joint. 

Column with Plate

Information

New products

Our stores

Tags