For 75mm Cavity

We can weld a plate onto your channel to bridge a 75mm cavity. Please select the position of the plate and then enter the length of beam you require. The plate length will be the same as the beam length and is calculated within the total cost inclusive of welding. Don't forget you can also add timber and service holes to your beam, please select...

We can weld a plate onto your channel to bridge a 75mm cavity. Please select the position of the plate and then enter the length of beam you require. The plate length will be the same as the beam length and is calculated within the total cost inclusive of welding. Don't forget you can also add timber and service holes to your beam, please select these below and add them to your order.

 Please Note 

 All plates are set back from the edge to allow for a muck joint .  For example for 75mm cavity you would have: 100mm brick + 75 mm cavity + 100mm block = 275 mm therefore your steel will come with a 250 plate leaving enough room either side for a muck joint. 

More

For 75mm Cavity  There are 6 products.

Showing 1 - 6 of 6 items
Showing 1 - 6 of 6 items

Information

New products

Our stores

Tags