0118 9757500
Mon - Fri: 8:00 - 17:00
£0.00
A flitch plate is designed to be sandwiched between two pieces of timber, held together by a bolt and forms a flitch beam.
£0.00
Rectangular hollow sections (RHS) are described by their depth, width and wall thickness 200 x 100x 10 where the 10mm represents the wall thickness of the RHS. The rectangular...
£0.00
Flat Bar is a versatile product which is commonly used in fabrication. With a flat surface and square edge, this product can be purchased in a range of widths and thicknesses...
£0.00
Back to back channels are two parallel flange channels which are bolted together. Their spacing apart means that a cavity can be left clear. We can supply back to back channels...
£0.00
Back to back beams are two beams bolted together and used if greater support is need for above masonry work. Their spacing apart also means that they can support internal and...
£0.00
We hold a large stock of PFC Channel and can cut to your requirements up to a maximum length of 12m. Due to the large amount of stock we hold we are able to offer a fast...
£0.00
Universal columns are also known as I beams or H-sections due to their profile appearance. They are commonly used as vertical supports for most steel structures and are...
£0.00
Universal Beams are also referred to as I beams or H-sections due to their profile appearance. They have a greater depth than universal columns which means they have a higher...
On Top
