Steel

We hold a large quantity of stock so that we can meet your steel needs quickly to keep your job moving. We stock universal columns , universal beams, parallel flange channels as well as square , rectangular and circular hollow section which are all available for quick delivery or collection. All of our product pictures are accompanied by a techn...

We hold a large quantity of stock so that we can meet your steel needs quickly to keep your job moving. We stock universal columns , universal beams, parallel flange channels as well as square , rectangular and circular hollow section which are all available for quick delivery or collection. All of our product pictures are accompanied by a technical drawing so that you can easily check the dimensions you need. We have additional options available on many of our products such as, adding service or timber holes and ordering a beam , column or channel with a plate . This means your steel is collected or delivered ready for installation. All of our steel comes painted as standard , which there is no additional charge for, but it you prefer to have your steel unpainted then please select this option and save it before entering the length you require.  If you have any queries or would like to discuss your order with one of our experienced staff then please contact our friendly team on 0118 9757500 who will be happy to help you. Keep checking our website as we will continue adding products which are available for fast online ordering to keep your job moving.

More

Steel  There are 17 products.

Subcategories

  • Universal Beams (UB)

    Universal Beams are also referred to as I beams or H-sections due to their profile appearance. They have a greater depth than universal columns which means they have a higher load capability and are most commonly used as horizontal structural supports.

    We hold a large stock of universal beam and can cut to your requirements up to a maximum length of 12m. Due to the large amount of stock we hold we are able to offer a fast turnaround for collection and delivery within 2-4 working days,meaning you get the materials you need quickly. We offer a next day collection for all cut only universal beams on orders placed between Sunday and Thursday. Your beam can come ready primed just select the paint yes/no option and once you save this it will enable you to enter the length of beam you require. 

    You can also add service and timber holes to your beam so that it arrives ready to be installed. If you need a plate welded onto your beam please see our beam with welded plate section,select the cavity you require and place your order.

    If you would prefer to discuss your order with our experienced team then please contact the office on 0118 9757500.

  • Universal Columns (UC)

    Universal columns are also known as I beams or H-sections due to their profile appearance. They are commonly used as vertical supports for most steel structures and are sometimes used as horizontal supports where height is limited. We hold a large stock of universal column and can cut to your requirements up to a maximum length of 12m.

    We hold a large stock of universal column and can cut to your requirements up to a maximum length of 12m. Due to the large amount of stock we hold we are able to offer a fast turnaround for collection and delivery within 2-4 working days, meaning you get the materials you need quickly. We offer a next day collection on all cut only universal columns on orders placed between Thursday and Sunday. Your column can come ready primed just select the paint yes/no option and once you save this it will enable you to enter the length of column you require.

    You can also add service and timber holes to your column so that it arrives ready to be installed. If you need a plate on your column please see our column with plate section, select the cavity you require and place your order.

    If you would prefer to discuss your order with our experienced team then please contact the office on 0118 9757500.

  • PFC Channel

    We hold a large stock of PFC Channel and can cut to your requirements up to a maximum length of 12m. Due to the large amount of stock we hold we are able to offer a fast turnaround for collection and delivery within 2-4 working days, meaning you get the materials you need quickly. We offer a next day collection on all straight cut channel on orders placed between Sunday and Thursday. Your PFC Channel can come ready primed just select the paint yes/no option and once you save this it will enable you to enter the length of channel you require. 

    You can also add service and timber holes to your PFC Channel so that it arrives ready to be installed. If you need a plate on your channel please see our PFC Channel with plate section, select the cavity you require and place your order.

    If you require any assistance with your order then please do not hesitate to contact our experienced team on 0118 9757500.



  • Back to Back Beams

    Back to back beams are two beams bolted together and used if greater support is need for above masonry work. Their spacing apart also means that they can support internal and external skins whilst leaving the cavity clear. We can supply back to back beams up to a length of 12m.

    Due to the large amount of stock we hold we are able to offer a fast turnaround for collection and delivery within 2-4 working days meaning you get the materials you need quickly. 

    Your back to back beam can come ready primed just select the paint yes/no option and once you save this it will enable you to enter the length of back to back beam you require. You can also add service and timber holes to your back to back beam so that it arrives ready to be installed.

     If you would prefer to discuss your order with our experienced team then please contact the office on 0118 9757500.

  • Back to Back Channels

    Back to back channels are two parallel flange channels which are bolted together. Their spacing apart means that a cavity can be left clear. We can supply back to back channels up to a length of 12m.

    Due to the large amount of stock we hold we are able to offer a fast turnaround for collection and delivery within 2-4 working days, meaning you get the materials you need quickly.  Your back to back channel can come ready primed just select the paint yes/no option and once you save this it will enable you to enter the length of back to back channel you require. 

    Please specify the cavity space you require of either 50mm, 75mm or 100mm when placing your order.You can also add service and timber holes to your back to back channel so that it arrives ready to be installed.

    If you would prefer to discuss your order with our experienced team then please contact the office on 0118 9757500.

  • Beam with Plate

    You can have a plate welded to your beam to bridge either a 50 mm, 75 mm or 100 mm cavity. Select the paint yes/no option and then select the position of the plate you require. Once you save these two options please enter the length of beam you require. The plate length will be the same as the beam length and is calculated within the total cost inclusive of welding. Don't forget you can also add timber and service holes to your beam, please select these below and add them to your order. 

  • PFC Channel with Plate

    You can have a plate welded to your PFC Channel to bridge either a 50 mm, 75 mm or 100 mm cavity. Select the paint yes/no option and then select the position of the plate you require. Once you save these two options please enter the length of PFC Channel you require. The plate length will be the same as the channel length and is calculated within the total cost inclusive of welding. Don't forget you can also add timber and service holes to your channel, please select these below and add them to your order. 

  • Rectangular Hollow...

    Rectangular hollow sections (RHS) are described by their depth, width and wall thickness 200 x 100x 10 where the 10mm represents the wall thickness of the RHS. The rectangular hollow section we stock is cold formed with the joint seam welded on the inside of the section.

    We hold a large stock of rectangular hollow section which you can order in  lengths of 3750 mm or 7500 mm. We can cut your box section to size please select the length (3750 mm or 7500 mm ) you will require for your cut to be made and add the size you need cut in the comments section when you checkout. 

    For example if you require a length of 2500 mm then select a 3750 mm length ,add it your basket and then tell us the length you require to be cut in the comments box when you check out. 

    If you need any assistance then please contact our friendly and experienced team on 0118 9757500.

  • Square Hollow Section

    Square hollow sections are also commonly known as box section and are mainly used as post supports on a range of structures. Square hollow sections (SHS) are described by their depth, width and wall thickness for example in 100 x 100 x 10 the 10 mm represents the wall thickness of the SHS. The square hollow section we stock is cold formed with the joint seam welded on the inside of the section.

    We hold a large stock of square hollow section whcih can be ordered in lengths of eitehr 3575 mm  or 7500 mm . We can cut your box section to size please select the length (3750 mm or 7500 mm ) you will require for your cut to be made and add the size you need cut in the comments section when you checkout.

    For example if you require a length of 2500 mm then select a 3750 mm length ,add it your basket and then tell us the length you require to be cut in the comments box when you check out. 

    If you would prefer to discuss your order with our experienced team then please contact the office on 0118 9757500.

  • Circular Hollow Section

    Circular hollow section (CHS) is also known as tube and is commonly used as support posts, braces and for decorative purposes. Circular hollow section dimensions are shown as 114.3 x 5 where 114.3 mm represents the diameter of the CHS and the 5 mm represents the wall thickness of the tube.The circular hollow section we stock is cold formed with the joint seam welded on the inside of the section.

    We hold a large stock of circular Hollow Section which can be ordered in lengths of either 3750 mm or 7500 mm.  We can cut your box section to size please select the length (3750 mm or 7500 mm ) you will require for your cut to be made and add the size you need cut in the comments section when you checkout.

    For example if you require a length of 2500 mm then select a 3750 mm length ,add it your basket and then tell us the length you require to be cut in the comments box when you check out. 

    If you need any assistance then please contact our friendly and experienced team on  0118 9757500.

  • Flitch Plates

    A flitch plate is designed to be sandwiched between two pieces of timber, held together by a bolt and forms a flitch beam. 

    We hold a large stock of flitch plate and can cut to your requirements up to a maximum length of 6m. Due to the large amount of stock we hold we are able to offer a fast turnaround for collection and delivery within 2-4 working days, meaning you get the materials you need quickly.  Your flitch plate can come ready primed just select the paint yes/no option and once you save this it will enable you to enter the length of flitch plate you require. 

    If you wish to discuss your requirements with our experienced team then please do not hesitate to contact the office on 0118 9757500.

  • Plate / Flat Bar

    Flat Bar is a versatile product which is commonly used in fabrication. With a flat surface and square edge, this product can be purchased in a range of widths and thicknesses and up to a maximum length of 12m .If you require a flat bar welded to a beam then please select this option from our menu. Due to the large amount of stock we hold we are able to offer a fast turnaround for collection and delivery within 2-4 working days meaning you get the materials you need quickly. If you would prefer to discuss your order with our experienced team then please contact the office on 0118 9757500.

  • Gallow Brackets

    Gallow Brackets

  • Angle Lintels

    Angle Lintels

  • Column with Plate

    You can have a plate welded to your column to bridge either a 50 mm, 75 mm or 100 mm cavity. Select the paint yes/no option and then select the position of the plate you require. Once you save these two options please enter the length of column you require. The plate length will be the same as the column length and is calculated within the total cost inclusive of welding. Don't forget you can also add timber and service holes to your column, please select these below and add them to your order. 

per page
Showing 1 - 9 of 17 items
Showing 1 - 9 of 17 items

Steel

Information

New products

Our stores

Tags